Tx300p-1800 direct-to-garment textile printer for customized design

Belt Drive Direct-to-Fabric Textile Printer
The WER TX300P-1800B belt drive direct-to-fabric textile printer includes many features found in high-end direct-print models. It was designed specifically for direct-to-textile applications and is suitable for users creating samples or short-run pieces. It includes new print heads with a high gap setting that enables printing on thick or thin textiles, plus woven patterns or raised fiber surfaces, while maintaining accurate ink droplet placement. Mimaki original inks are specifically designed for exceptional color reproduction onto natural or synthetic fibers for producing flags, banners, fashion textiles, performance sportswear, interior décor and more.
Direct-to-textile printer
High head gap setting for direct printing onto thick, thin, woven or raised fiber textiles
74-inch (1880 mm) print width
Multiple ink types meet a range of applications
Print on natural or synthetic fibers
Advanced textile feeding (belt transport system) mechanism ensure stable transport
Belt wash unit
Variable dot printing for smooth mage quality
MAPS4 for smooth images
Nozzle Check Unit and Nozzle Recovery System
Ethernet and email notification
MBIS3 two-liter bulk ink system

WER Technologies for Consistent Output and Productivity
Waveform control jets each ink droplet at an optimum angle to maintain ink droplet formation and shape
Mimaki Advance Pass System 4 (MAPS4) technology reduces banding and produces smoother images
Nozzle Check Unit (NCU) automatically detects and recovers clogged nozzles
If a nozzle cannot be recovered, the Nozzle Recovery System (NRS) selects substitute nozzles and restarts printing
Mimaki Bulk Ink System 3 (MBIS3) with two liter ink packs enable longer runs
TxLink3 software (available as an option) for textiles offers effective color management, standard profile creation, simple RGB and CMYK color replacement on raster and vector data, as well as the ability to create colorways

 

What you can do with the WER TX300P-1800B Printer
Fashion textiles
Soft signage
Backlit fabric signage
Exhibit graphics
Banners
Flags
Interior décor
Performance apparel
and more…
Technical Overview of the Mimaki TX300P-1800B Printer

Print System	On-demand piezo, four print heads in an-line configuration
Max print width	74.02 inches (1880mm)
Print resolutions	360, 540, 720, 1080, 1440 dpi
Print Speed* (4 color mode)	Draft (2-pass) 732 SqFt (68 SqM) / Hr Standard 2 (6-pass) 398 SqFt (37 SqM) / Hr High Quality (12-pass) 151 SqFt (10 SqM) / Hr *The listed print speed is the specification of the printer. The available print speeds vary depending on the ink types used and print mode selected.
Ink Type	Mimaki Sb420 sublimation dye ink: Bl, M, Y, K, Lbl, Lm
	Mimaki TP400 textile pigment ink: C, M, Y, K, Bl, R, Lk
	Mimaki RC400 reactive dye ink: C, M, Y, K, Bl, R, Or, Lk
	Mimaki AC400 acid dye ink: C, M, Y, K, Bl, R, Or, Lk
	Mimaki Dd400 disperse dye ink: C, M, Y, K, R, Grey(Lk), Violet, Pink*
	* Dd400 will be available in the future. Available colors may change.
Ink Capacity	2 liter ink packs
Max roll weight	88 lbs. (40 kg)
Operational environment	Temp: 68˚ - 86˚ F (20˚ - 30˚ C) 35-65% RH (non-condensing)
Connectivity	USB 2.0, Ethernet 1000Base-T
Power Supply	Single-phase AC 100-120V (AC 220-240V)
Dimensions (W x D x H)	125 x 75.3 x 72.6 inches (318 x 1912 x 184 cm), printer w/belt unit
Weight	1382 lbs. (627 kg)

Ink for the TX300P-1800B
Available Inks
Mimaki Sb420 sublimation dye ink: Bl, M, Y, K, Lbl, Lm
Mimaki TP400 textile pigment ink: C, M, Y, K, Bl, R, Lk
Mimaki RC400 reactive dye ink: C, M, Y, K, Bl, R, Or, Lk
Mimaki AC400 acid dye ink: C, M, Y, K, Bl, R, Or, Lk
Mimaki Dd400 disperse dye ink: C, M, Y, K, R, Grey(Lk), Violet, Pink*